|
Re: How to: Install RTL steering wheel
I cannot see a spacer working. There isn't enough thread to just stick something behind the wheel more than 1/8" or 1/4". An adapter would have to be bolted onto the shaft - it has to have a splined / female end, and some way to secure it on the OEM shaft. Then the other end has to be splined / male and threaded to accept the bolt that holds the wheel on.
Actually, a custom shaft might actually be easier. Cut the old one and weld in a piece to make it longer. Or you could look at making new brackets that hold the shaft and tilt mechanism.
|