[breakfastchef]

Got my Chrome ROC sticker today and was pretty excited to apply it to the rear window. First difficulty was getting the die-cut sticker free from the backing. As I peeled it away, some of the thinner, smaller details of the sticker stayed on the backing sheet. It took me under five minutes and an X-Acto knife with a #11 blade to carefully pick away the backing sheet from the sticker until the whole thing was on the adhesive-backed top layer.

Now here is the kicker...I jumped into the rear seat of the Ridge (yea, you see it coming), cleaned the window, lined up the sticker and applied it to the window - BACKWARDS! I swear I must be the biggest dumbass on these boards. Not only is the sticker not readable from the outside of the truck (because it is facing to the interior), but the headreast blocks my view of it from the inside. Wish I got a second chance. I suppose I will place another order and use a trusty straight razor blade to remove my mistake. Oh the shame and horror of these difficult modifications.

Recommendation: Include the instructions with each sticker as in T Mac's post and put in big, bold letters that the decal should be applied to the OUTSIDE of the vehicle window.