Quote:
Originally Posted by MikeT
He!!, I made that clear as mud didn't I 
The valance I refered to is where the third break light is (Right above the rear window). Tape up the the groove or body line between the valance and the roof and see if the windnoise is gone when you are driving at 45mph or higher. |
xd9x19
picture - worth a thousand words.
I found the source of my wind whistle noise this way. Very loud at times and annoying BTW.
You can also put a strip of tape over half of the windshied moulding and onto the sheet metal (cover the seam) to eliminate that area.
I covered every seam on the RL until the noise stopped then removed a section at a time untill the noise re-appeared and walah, it was the area that MikeT suggests.
Good luck.