|
Re: Scangauge installation
I did not remove the console - I removed the not an ashtray and drilled from there and removed the kickpanel beside the accelerator to run the cable.
there nothing behind the location I suggested to drill. there are wires 2 inches to the right of where I drilled. ( used a wood drill bit 1" to make the holes )
I just drilled the top hole in the behind the not an ashtray and the bottom hole and then drilled out the middle.
I pushed a coat hanger from the front toward the accellerator and pulled the scangauge wire that way.
all the excess wire is in the console.
__________________
RTL w/moonroof, Honda pin stripes, Lund window vents, Lund hood bug shield, front and rear chrome bumpers inserts, foglights, wheel flares, mud flaps door protectors, and snd hon2 hybrid ipod adapter.
|