RAAMaudio sound proofing Starts July 11th- Ends August 10th

SRQRIDGE
07-09-2009, 06:46 PM
Hello ROC

I have been in touch with Rick McCallum owner of RAAMaudio.
http://www.raamaudio.com
I was looking and doing research on sound proofing my Ridgeline and I
came across Rick's company from reading threads here on the ROC. I
contacted Rick and asked him about a group buy for the ROC. Below is
the group buy he is offering our members.

RAAMmat BXT Group Buy
______________________

30 day Group Buy for members on all RAAMaudio products. starts July 11th- Ends August 10th

Check out their products,
www.raamaudio.com

Before ordering, calling etc, please Read the HOW TO guide on RAAMaudio.com, for best results you will want to follow it very closely!

_____________________________________________

You are welcome to order exactly what you want with the minimum amount
of each item to be 1 roll of BXT, 3 yards of Ensolite, 1 can of adhesive.
_____________________________________________

Typical order sizes:

Basic install, utilized carefully will result in a great deal of
improvement, focus mainly on doors, back of cab wall.

1 roll BXT RAAMmat (62.5 sq ft) $99.00 Savings of 17%
3 yards Ensolite foam (42 sq ft) $29.85 Savings of 17%
1 can adhesive for foam (use sparingly) $6.95 Savings of 9%
______________________________________________

Mid to upper level install, as above but includes at least most of the
floor. Half rolls are not normally sold but making this available for the GB for those that need it.

1 roll BXT RAAMmat (93.75 sq ft) $99.00 Savings of 17%
1/2 roll SS floor only mat (31.25 sq ft) $29.50 Saving a bunch:)
5 yards Ensolite foam (70 sq ft) $49.75 Savings of 17%
2 cans adhesive $13.90 Savings of 9%
______________________________________________

Going all out, all the above and the roof if used properly.

1.5 rolls BXT RAAMmat (93.75 sq ft) $148.50 Savings of 1/2 rolls SS floor only mat (31.25 sq ft) $29.50 Saving a bunch:) 7 yards ensolite foam (97.93 sq ft) $69.65 Savings of
3 cans adhesive $20.85 Savings of
______________________________________________


NOTE: DO NOT use SS floor only mat anywhere but on the floor, it could fail over time on horizontal surfaces and you do not want to have to deal with that, not worth it, use only as directed and it will be just
fine:)
Send all inquires directly to rick@raamaudio.com and
Include:

please send:
-List of items and amount of each item.
-Zip code
Paypal preferred
--------------------

For all Credit and Debit card orders ready to be placed please call:
801-829-4997
(not always manned or with another fellow enthusiast customer so leave a message if needed:) (if you wish you can email the CC info, billing and shipping address, card #, exp date, security code, name on card, etc but use 2-3 separate emails for security purposes)
-Shipping is via UPS ground, adhesive cannot ship by air, BXT and Ensolite
can ship by air.
-Shipping outside the US, Canada, UPS ground, duty free codes added to invoice, Other countries, USPS air mail.


Thanks again Rick for offering this Group Buy to our members.

Lex Luthor
07-09-2009, 07:35 PM
SRQRIDGE:

I commend you on coordinating this group buy. I contacted Rick McCallum last year and purchased the RAAMmatt BXT, Ensolite Foam, and Adhesive. We replaced all the OEM speakers in my Ridge. We installed Infinity 6020 C's in the front, Infinity 6022 SI's in the rear and we replaced the OEM subwoofer with the eD sq 10 and upgraded with a new box from Elemental Design. Before we installed the new speakers, we installed the RAAMmatt products. We kept the OEM head unit and I can tell you from experience that the RAAMmatt Soundproofing and the New upgraded speakers has defintely made a difference. The sound is MUCH MORE CLEANER! I highly reccommend the RAAMmatt products.:D

xridgelinex
07-09-2009, 07:40 PM
I commend you on coordinating this group buy. I contacted Rick McCallum last year and purchased the RAAMmatt BXT, Ensolite Foam, and Adhesive. We replaced all the OEM speakers in my Ridge. We installed Infinity 6020 C's in the front, Infinity 6022 SI's in the rear and we replaced the OEM subwoofer with the eD sq 10 and upgraded with a new box from Elemental Design. Before we installed the new speakers, we installed the RAAMmatt products. We kept the OEM head unit and I can tell you from experience that the RAAMmatt Soundproofing and the New upgraded speakers has defintely made a difference. The sound is MUCH MORE CLEANER! I highly reccommend the RAAMmatt products.:D

How much did you use?

SRQRIDGE
07-09-2009, 08:32 PM
;)SRQRIDGE:

I commend you on coordinating this group buy. I contacted Rick McCallum last year and purchased the RAAMmatt BXT, Ensolite Foam, and Adhesive. We replaced all the OEM speakers in my Ridge. We installed Infinity 6020 C's in the front, Infinity 6022 SI's in the rear and we replaced the OEM subwoofer with the eD sq 10 and upgraded with a new box from Elemental Design. Before we installed the new speakers, we installed the RAAMmatt products. We kept the OEM head unit and I can tell you from experience that the RAAMmatt Soundproofing and the New upgraded speakers has defintely made a difference. The sound is MUCH MORE CLEANER! I highly reccommend the RAAMmatt products.:D

Thanks Jimmy....this project will take some time. How did you do yours all at once or a little at a time?
Did you do the floor as well? I'm on the fence on doing the floor....I need to do my research on how hard it is to remove the seats, carpet, etc.

Lex Luthor
07-09-2009, 09:17 PM
In my post I referred to we did the install. I actually had a friend of mine that is a installer do this at his house on the weekend. My friend also installed the Shark II antennae, PXMAG Interface and PXMAG HD radio in the same weekend. He told me that the most difficult thing to do was removing the rear seat. We opted to cover the back wall and a portion of the floor under the subwoofer in the rear. We also covered all the door panels. This job required 1 Roll RAAMmat BXT, which covers 62.5 Square Feet. We also needed 4 yards Ensolite and 2 cans V&S Spray Adhesive. My total price for materials was $206.20 and this was in February of 2008. My installer buddy worked several years as a stereo installer and window tinter. He did a professional job and gave me a deal I could not pass up. I brought my Ridge to him on Friday afternoon and he was finished by 12:00 noon on Sunday.:)

P.S. Rick McCallum is a PROFESSIONAL that HAS WON several competions of SOUND OFFS. He KNOWS the business. HE is honest, trustworthy and has developed the BEST product on the market in my opinion. He reccommended that I did not do all of the floor. This would require a great deal more supplies.

Check this out. I paid $118.96 per roll for BXT, I paid $11.96 per yard for Ensolite, and $7.66 per can for V&S Spray Adhesive in February of 2008. I would have to say that Rick is giving ROC members a GREAT deal based on what I paid.

SRQRIDGE
07-16-2009, 12:21 AM
Rick has also offered to the EOC and CR-V Club members as well. So other Honda owners can take advantage of this group buy.;)

SRQRIDGE
07-22-2009, 11:14 PM
Bump....About 18 days left....Take advantage of the discount. I am ordering mine tomorrow....:)

ridgelinewannab
08-05-2009, 12:33 PM
thanks for setting this up for the members. I got ahold of Rick yesterday afternoon, placed an order and received a shipping notice 15 min after paypal payment! Real nice guy

SRQRIDGE
08-05-2009, 04:47 PM
thanks for setting this up for the members. I got ahold of Rick yesterday afternoon, placed an order and received a shipping notice 15 min after paypal payment! Real nice guy

Rick is awesome. how much did you order?



;)

dancetiludrop
08-05-2009, 09:23 PM
I did my entire Element in Raamat and it was a big improvement....highly recommend the product.

Might have to get in on this and do the doors in my RL :D