New billet grilles now available!

Note: All of the items and future items you see on the site are specially priced for forum members.

http://www.burtmanindustries.com/images/prodimages/ridge_billet.jpg

New pic!

http://www.burtmanindustries.com/gallery/images/ridge_billet2.jpg[/img]

http://www.burtmanindustries.com/zoomprod.php?id=ridge_billet

Can also be done in black powder coat for aprox $45 additional per grille.

Very nice look Jason!
Welcome aboard.


www.cloud-rider.com

Nice wood interior.

http://www.burtmanindustries.com/gallery.php?id=ridg_q45lb_06_up

I might actually consider this at some point.

I like the grill as well, but I'm uncertain how it would change the air flow to the engine.

I have that same question also. I like the look, but I don't want to damage the truck looking good.

The upper grille is a full replacement grille, and if anything will improve airflow since the whole thing is open. When done, you will have a left over stock grille. The write-up on the site gives me detail on this grille.

it a difficult install, u have to take bumper off, but the rewards are great, check mine out. there are better prices out there than burtman.

it a difficult install, u have to take bumper off, but the rewards are great, check mine out. there are better prices out there than burtman.
I saw Jasons grill offered in a magazine.... then checked the web site: http://www.carriageworksinc.com/Other.jsp
They are alittle higher than Jason... 6 bucks more.. When I looked at Jasons site, his are bolt over not the gut & cut like mentallyabused

Nice wood interior.

http://www.burtmanindustries.com/gallery.php?id=ridg_q45lb_06_up

I might actually consider this at some point.

I like the grill as well, but I'm uncertain how it would change the air flow to the engine.
do they have dark marble maple finish?

Nothing personal but....YUCK! It makes the Ridge look even more like a kitchen appliance. Come to think of it I don't care for the billet grill look on any vehicle I've ever seen one on.
Beauty is definitely in the eye of the beholder.

Nothing personal but....YUCK! It makes the Ridge look even more like a kitchen appliance. Come to think of it I don't care for the billet grill look on any vehicle I've ever seen one on.
Beauty is definitely in the eye of the beholder.

Well, Basils, I'll join you in saying I am not impressed with this look either. No offense to those that like it, but I prefer my big 'H' on the front! ;)

Yeah, today we seem to be in a style era where all emblems and identifiers are removed from cars. I saw a new civic the other day and some kid removed all the Honda emblems already. Looked pretty ugly to me as he had also done the usual low profile tire and wheel swap too.
I guess I'm getting old and I don't like a lot of the new styles the younger guys like......I'm 42.

With billet grilles you either like them, or you don't. There is no line. Many have been asking for them, so, it's something different for those who want it. No harm if not everyone likes it.

You can still affix the honda emblem to the middle of the grille if you want. Some have done this on the QX56 grilles we sell and Armada.

What about one like this:

http://cgi.ebay.ca/2006-HONDA-RIDGELINE-STAINLESS-Z-GRILLE-GRILL-GRILLS_W0QQitemZ8020418178QQcategoryZ33645QQrdZ1QQ cmdZViewItem
or this one
http://cgi.ebay.ca/2005-2006-Honda-Ridgeline-BILLET-GRILLE-GRILL-rt-rtl_W0QQitemZ8020761782QQcategoryZ33645QQrdZ1QQcmd ZViewItem

Seen any of those kicking around

do they have darkfinish?

Yes, I can have them powder coated in black as well for a pretty small fee.

Hey Jason can you send me an install guide before I decide to buy. I want to see how hard it is to install.

Hey Jason can you send me an install guide before I decide to buy. I want to see how hard it is to install.

Emailed you.

Fresh pic of billet grilles from ROC member.

http://www.burtmanindustries.com/gallery/images/ridge_billet2.jpg

looks hot on the black ridge (like mine)

I'm SOLD on one! :)

how much is the total to get all these powder coated black any pics of them powder coated

how much is the total to get all these powder coated black any pics of them powder coated

Powder coating will run about an extra $45 for the top, and $45 for bottom 3 piece.

can the H logo still be attached?

BLACK powder coated versions can now be ordered on the site and don't have to be called in anymore.

Burtman Industries Billet Grilles (http://www.burtmanindustries.com/zoomprod.php?id=ridge_billet)

And yes, the emblem can still be attached no matter which version you get. Emblem tape or fishing line works best.

There are also some newer/better pics on the site.

BLACK powder coated versions can now be ordered on the site and don't have to be called in anymore.

Burtman Industries (http://www.burtmanindustries.com/zoomprod.php?id=ridge_billet)

And yes, the emblem can still be attached no matter which version you get. Emblem tape or fishing line works best.

There are also some newer/better pics on the site.

Jason

Here is a picture of grill I ordered from you. I also took your idea of attaching the logo with fishing line.

Thanks
Dan

Jason

Here is a picture of grill I ordered from you. I also took your idea of attaching the logo with fishing line.

Thanks
Dan

With out bull bar, sorry truck was dirty.:)

32088

Here's mine with the T-Rex Grille and Romik running boards. I'm a Burtman follower. Products and service are set apart.

SW

32088

Here's mine with the T-Rex Grille and Romik running boards. I'm a Burtman follower. Products and service are set apart.

SW

AWESOME PIC!!! Can you do anymore?

That grill in black is very nice. I really like the way it looks. Keep up the great work.
http://members.cox.net/tony24/100_2155-1024.jpg

With out bull bar, sorry truck was dirty.:)

Jason

If I wanted to order the 3 lower grills, what is the cost in Black powder?:confused:

I already have the main grill ordered from you.

Thanks
Dan

Would be around $214. Go to the site here, and you can order just the 3 lower, in black powdercoat. The website will reload the prices automatically for you.

http://www.burtmanindustries.com/zoomprod.php?id=ridge_billet

Any fitment for the 2009's?

Is anything about the 2009 the same for any of the grilles?

If not, I'd need someone that is close to Corona, CA to come in wit a 09 truck to check it.

Jason,

Do you have the black powder coat mesh grilles, like the MX grill from Grillcraft? I have an 09' and currently shopping for a mesh grill.

Yes, i do! Give me a call or email me with your email.

You can find pics of the black billet grilles we sell here:

http://www.ridgelineownersclub.com/forums/showthread.php?t=12928&highlight=black+billet+grille