Light Replacement Guide

[k757]

2006/2007 HONDA Ridgeline

Sylvania.com website - All automotive lights (link)

Sylvania.com website - Application Guide (link)



High & low beam headlamp
9003/HB2
9003SU Silverstar ULTRA for Ultra Night Vision - The Whitest and Brightest Halogen
9003ST Silverstar High Performance Lighting: The Whiter and Brighter Halogen
9003XV XtraVision Halogen - The Brighter Light
9003CB Cool Blue Halogen - The Whiter Light

Parking light
3457ALL
3457AST Silverstar Signal Lighting: Complete the Look: Crisp, Clean, Style

Front turn signal
3457ALL
3457AST Silverstar Signal Lighting: Complete the Look: Crisp, Clean, Style

Rear turn signal
7440

Tail light
7443

Stop light
7443

High mount stop light
168

License plate
168

Back up light
921
921LL Long Life Upgrade: Up to twice the life of the standard lamp

Rear sidemarker
168

Map light
DE3175

Dome light
904

Step/Courtesy light
194
194LL Long Life Upgrade: Up to twice the life of the standard lamp

Trunk/Cargo area
168

[Andy-Montreal]

Thanks for posting the info Keith. Any idea on the oem fogs?

[k757]

Originally Posted by Andy-Montreal

Thanks for posting the info Keith. Any idea on the oem fogs?

Sure thing. no and also don't know the license plate bulbs either., but my uess is that it is a 168 to match other Honda models

[fugazi]

Has anyone else had any problems getting the screws out of the light covers in the bed? The Phillips screw driver just turns, nothing happens. Striped?! The truck is brand new. I thought i would see about replacing bulbs with LED's were I could.

[madi05]

mine unscrewed right out, so maybe yours r stripped
the license plate ones r 168

madi05

[Sparkland]

Anyone help me with removing the tail light lense cover?

I have the screws out and trying to pull in straight out toward the rear of the truck rather than to the side and it will not release.

Any thoughts?

Thanks, Brad

[chuck401]

Originally Posted by Sparkland

Anyone help me with removing the tail light lense cover?

I have the screws out and trying to pull in straight out toward the rear of the truck rather than to the side and it will not release.

Any thoughts?

Thanks, Brad

You have to pull straight back, there are two rubber groumets that hold the assy.
Wiggle from top and bottom with increasing pressure, it will come out. Hope this helps.

[Tcape]

Thanks very much for posting this info, Keith. My '08 RTL is only 10 weeks old, but one of these days, I'll need to replace a bulb or two. Got this link in my "Farorites." Much appreciated!
Tom

[Sparkland]

Thanks for the help. I reread your post and just applied a little more force with one of my KTC removal tools and it came out fine.

Brad