brake controller mounting

[ridgelinef4i]

right there! close enough to reach when needed out of the way when not and I will reroute the wires to come up through the center console pocket soon.

[ScottK]

Originally Posted by ridgelinef4i

right there! close enough to reach when needed out of the way when not and I will reroute the wires to come up through the center console pocket soon.

what did you drill into to mount the bracket?

[5S Dude]

Originally Posted by ScottK

Where is everyone mounting their electronic brake controller?

Hi Scott, Originally, we had our Prodigy mounted on the left hand side of the steering column until I got tired of bashing my knee getting in n out. I’ve since moved it to the right side……much better w/ no knee damage!

[vailridge]

I tried the Velcro in front of my right knee and it has already fallen. I did prep the site with alcohol. Any ideas? It’s not even really hot out yet. I may resort to nuts and bolts.

[Just Ask]

Some pics are here in this past post:

Brake Controller Mounting Location

[beerkat]

Originally Posted by missileman

In front of my right knee with heavy duty velcro.

That the way I did it also.

[ScottK]

Originally Posted by 5S Dude

Hi Scott, Originally, we had our Prodigy mounted on the left hand side of the steering column until I got tired of bashing my knee getting in n out. I’ve since moved it to the right side……much better w/ no knee damage!

did you remove the panel or just drills straight into it?

[5S Dude]

I removed the lower panel to first check for drill clearance but found it to be unobstructed. I remounted the panel, transfered the two hole locations and drilled clearance diameters for stainless 10-32 machine screws with "nylok nuts"
I rather it be very secure than accidentally fall down between the brake pedal and the floor if ya get my meaning.