Finally did it. I designed the Box on eD's site. After reading over ChrisM's therad over and over I knew I couldnt re dup this box. I totally understand what chris meant by having to router out the back of the box If u look at the back of the stock box there is a slanted router'd out section for a cross brace. What I did to counteract that was flush mouunt the sub. Which worked out perfectly. after getting the seat back in I have a good 2-maybe 3 inches of clearence between the back of the seat and the sub even at full blast and full gain the sub doesnt hit the back of the seat. Its not a god awakening boom. but its light years better then the stock system.
its .34 cubic feet and I placed about 1.5 lbs of pillow stuffing in there to help it a tad. I dont work for eD they didnt pay me to do this. I figure if u gusy wanna replace the stock sub with something bigger and keep the underneath of ur back seat free for what u bought the truck for ( storage) then here u go
its .34 cubic feet and I placed about 1.5 lbs of pillow stuffing in there to help it a tad. I dont work for eD they didnt pay me to do this. I figure if u gusy wanna replace the stock sub with something bigger and keep the underneath of ur back seat free for what u bought the truck for ( storage) then here u go