Honda Ridgeline Owners Club Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
23 Posts
Discussion Starter #1
ok so last week i bought a used ridgeline and it had the tonneau cover but laying on the bed but not on it.. after countless minutes of trying to put it on i finally realized that i was missing all the hardware that goes on the truck.. all i basically have is the actual cover with the hardware atached to it.. so i went to majestic honda but im not sure what i need exactly to put the thing together.. do i need the hardware kit and the rail kit?? this is the page

http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=RIDGELINE&catcgry2=2006&catcgry3=4DR+RTL+SUNROOF&catcgry4=KA5AT&catcgry5=BED+TONNEAU+COVER+SYSTEM
 

·
Registered
Joined
·
4,075 Posts
I suggest you review the installation instructions for the tonneau. Compare with what you do have and purchase the needed parts.

Here is a link to the tonneau installations.
http://www.hondapartsdeals.com/honda_install_guides.php

Good luck and don't forget the pics! All posters are required to include pics of anything and everything discussed on these pages!!!

(of course, I didn't see that this post was in the Bakflip forum. I only saw that he referenced a link to the OEM tonneau)
 
1 - 3 of 3 Posts
Top