I'd say go to PEP boys. Mine has a ton of this stuff, it's all pretty generic and should fit fine.
Bump Guards For Doors
I Would Like To Find Bump Guards That Is The Same Color As The Trim Works (top Rail Of The Bed, Or The Running Boards), To Install On My Doors. I've Had A Couple Of Nicks Already From Folks Not Carefull Opening Their Doors. I Don't Care Too Much For The Color Coordinated Bump Guards From Honda. I Was Thinking Of Ordering The Black Set For My Silver Truck But It Will Not Look Right With That Shinny Black.
1 - 15 of 15 Posts
Hi Tex,
I don't know if you are looking for but check this website:
http://www.autosportcatalog.com/index.cfm?fa=p&pid=1901&cid=105
I don't know if you are looking for but check this website:
http://www.autosportcatalog.com/index.cfm?fa=p&pid=1901&cid=105
3598
I ordered the slim ones for my Turbo S item #3598 in CLEAR from autosport and they turned yellow within about 7 months. I just took them off when I detailed the Turbo S to sell.
I don't recommend the clear ones because they yellow really bad. I don't know about the others.
I ordered the slim ones for my Turbo S item #3598 in CLEAR from autosport and they turned yellow within about 7 months. I just took them off when I detailed the Turbo S to sell.
I don't recommend the clear ones because they yellow really bad. I don't know about the others.
I just looked at various trims at Pep Boys yesterday. I have the same concerns due to a door ding already. Toudh up paint helped, but I can see it if I look closely.
I don't like the Honda door guards and I especially don't like the price. This is a place where Honda could have done better by us. I've been paying more attention and it seems that most cars and trucks come stock with something to protect them from careless people and their doors.
I, too, would like something in a muted black. If you find a good product, spread the word. It would be nice to have something with finished edges about the width of the doors.
I don't like the Honda door guards and I especially don't like the price. This is a place where Honda could have done better by us. I've been paying more attention and it seems that most cars and trucks come stock with something to protect them from careless people and their doors.
I, too, would like something in a muted black. If you find a good product, spread the word. It would be nice to have something with finished edges about the width of the doors.
Vertrkr, thanks for the Pep Boys tip. Went shopping for my Ridge last night. Bought door guards. It is a 16 ft lenght of 3/4 inch wide, self adhering, embossed black plastic material that is about 3/16 inch thick. I plan to install right above the top groove of the sheet metal, which I think it curves out the most. Also, bought door edge guards of the same material, about a 1/4 inch wide. Also, bought two sets of bumper guards, this time it is the same shade of silver as my Ridge, with a touch of chrome. This is about 14 inch long and will wrap around the front corners of the bumper. And maybe on the rear bumpers as well. Bought a netting for $20 for the truck bed. It will cover the full width and length of the truck bed and is adjustable!! Also bought a set of four tie down straps that comes with a carry on bag. Lastly, bought a chrome tip for the exhaust pipe that has a fluted opening, which looks very cool! All this for less than a hundred!!
Tex:Tex's Ridge said:Vertrkr, thanks for the Pep Boys tip. Went shopping for my Ridge last night. Bought door guards. It is a 16 ft lenght of 3/4 inch wide, self adhering, embossed black plastic material that is about 3/16 inch thick. I plan to install right above the top groove of the sheet metal, which I think it curves out the most. Also, bought door edge guards of the same material, about a 1/4 inch wide. Also, bought two sets of bumper guards, this time it is the same shade of silver as my Ridge, with a touch of chrome. This is about 14 inch long and will wrap around the front corners of the bumper. And maybe on the rear bumpers as well. Bought a netting for $20 for the truck bed. It will cover the full width and length of the truck bed and is adjustable!! Also bought a set of four tie down straps that comes with a carry on bag. Lastly, bought a chrome tip for the exhaust pipe that has a fluted opening, which looks very cool! All this for less than a hundred!!
Mind posting pics when you're done. I'm interested in doing the same.
Thanks!
Will do!! I just got a message back when I tried to send only "will do". It said the message is too short to please lengthen the message!! That's always been my problem too!! oh well, se lavee!NJDevil5 said:Tex:
Mind posting pics when you're done. I'm interested in doing the same.
Thanks!
Tex, by chance do you have the 'brand' names of the door guards, door edge guards and bumper guards? I don't think I have a Pep Boys near me and wanna see if they have them online. Also, while you are at it....the cargo net too.....
Thanks!
Thanks!
Yessir! good thing trash was not picked up yet! Door Bump Guards, brand "StyleGuards" p/n s3311651 mfg by Cowles Products Company, New Haven CT. Door Edge guards, brand Universal Door Edge Protector, Professional Automotive Trim, # T3802, By Avery Dennison (www.averyaftermarket.com). Bumper Guards #68-1298 for Silver, Universal Bumper Guards (www.americanautoacc.com). Cargo Net #95006, brand Highland Adjustable Truck Net (www.highlandusa.com). Good hunting!meanmachine19 said:Tex, by chance do you have the 'brand' names of the door guards, door edge guards and bumper guards? I don't think I have a Pep Boys near me and wanna see if they have them online. Also, while you are at it....the cargo net too.....
Thanks!
I've been looking at a web site that has a lot of choices. As of yet I haven't decided but the prices are WAY below Honda's and can help you personalize your truck.
Here's the link:
http://www.customautotrim.com/products/moldings/body.htm
Here's the link:
http://www.customautotrim.com/products/moldings/body.htm
Thanks for the info Tex! Found a Pep Boys an hour away. Will make a trip up there next week and check for them!
Tex, Nice pics. I have been looking for a chrome exhaust tip, I will check with Pep Boys. I have also heard somone used a Acura TL tip? Can anyone verify what year. Thanks
Check out this site in BC....
www.carbumper.com/products.html
www.carbumper.com/products.html
1 - 15 of 15 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Honda Ridgeline Owners Club Forums
Honda Ridgeline Owners Club, forum community to discuss reviews, accessories, performance, care, mods, and more.
Full Forum Listing
