Honda Ridgeline Owners Club Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
177 Posts
i agree with hiPSI, i tint and do graphics on vehicles, if you have never done them dont attempt to do a full truck wrap! with all the curves of the RL your going to end up with some nasty looking corners and creases in the vinyl. my only tip for applying graphics is when im doing a big graphic i use soapy water and spray the vehicle where the vinyl goes so that way it doesnt stick to the paint right away you can still slide it if its not in the exact spot. other than that you use a hard card and squeegie out the water from behind the vinyl. sorry for rambling on.. its quite the process. good luck
You DON'T want to use water with wrap material. Yes wannabeef9 is correct in the using water method, but that's only good for vinyl. Wrap material is completely different, and it won't work for you if you get it wet during install. I prefessionally do window tinting, vinyl graphics, and vehicle wrapping for a living, so if you need any tips, feel free to PM me. But i will say, if you've never done it before, good luck.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top