Honda Ridgeline Owners Club Forums banner
1 - 2 of 2 Posts

· Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Got a 2007 Honda Ridgeline that had a bad crank gear, and I believe it allowed the cams to jump teeth (it ran rough, if at all). How do I verify the correct positions of the cams, and crank; and reset them if I need to? The cam timing marks are at 2 o'clock on the front cam, and 10 o'clock on the back cam, when the crank gear timing mark is at 12 o'clock.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top