Seat belt bolt threat size?

The 60/40 rear seat assembly requires a quantity of 6 hex head bolts that are 10 x 1.25mm tighten to 47 newton meters or 35 lbf-ft

The left and right hand outside rear seat belt assemblies use a single 7/16-20 UNF hex head bolt tighten to 32 newton meters or 24 lbf-ft

The center seat belt buckle assembly uses two 8 x 1.25mm hex head bolts tighten to 22 newton meters or 16 lbf-ft

Reference; Ridgeline 2006 Service Manual
Pages;20-115, 24-7 & 24-9

MikeT said:

That's right Ron, steal my thunder

Click to expand...

It's Wayne's fault!! It's his service manual..........

Spektrum84 said:

I dont suppose Wayne would mind sharing the thread details about the Front seat anchor bolts as well, would he?

Click to expand...

The front seat assembly requires a quantity of 4 Torx head bolts that are 10 x 1.25mm tighten to 47 newton meters or 35 lbf-ft (Use a T45 Torx Bit)

Reference; Ridgeline 2006 Service Manual
Pages;20-103