"This Library is Private."

 

 

You want to leave 'IMG' off the link. But even at that, it still does not work.

A little advice;

"Test it B4 You Post it"

of course, remote chance it might still work for YOU.

 

http://i609photobucket.com/albums/tt171john_sue2009/001_zpsabf04cecjpg

 

hmmm....

Is this pic in a photobucket album that is password protected??

 

Yes, I emailed it to "RollingRock", maybe he'd be kind enough to post it here? As you can see the gaskets, which I think are also a heat activated adhesive is pretty shot, Plus that round yellow one still has the white pin in it................it is the front center pin and once it went they all went!

 

'heartbreakridge' sent me a photo of the panel fittings. Here it is:

 

See the green round pin with the white pin inside? That green pin came out of the roof of truck in the center and the white pin stayed in the plastic roof pannel. At speed that roof would raise up at least 2-3 inches, can't believe it stayed on without falling off! Just remember NEVER remove that plastic roof without peplacing ALL the pins and grommets kids!:act035:

This job took a total of 10 minutes maybe.............

Used 90602-sx0-003 Clip, cow, white pins used 7 of em
PN# 91506-SJC AO1 Grommet B the oblong grommets 6 of em
91505-SJC-AO1 Grommet A used 1 of em, the round green grommet in center front.

 

No more roof noise even at 75mph..................yaaaaaaaay:act035:

Next project is changing Drivers side headlight, I don't think it'll be a drop in the bucket like that roof was either!