[17RidgeLine]

Just out of curiosity. Does anyone know where Honda shows the torque specs for the oil drain plug, transmission drain plug, front transfer case plugs and rear diff plugs?

I searched the forum and couldn't find anything.

Thanks.

Sent from my SM-G973U using Tapatalk

 

[MtMan]

Check here:

Maintenance Reference

All information here was gathered from the owners manual, parts websites, and members on the forums. Use at your own discretion. Oil 5.7 Quarts (0W20) Drain Plug Crush Washer (14mm) Part # 94109-14000 Drain Plug 14mm (29 lbf ft) Oil Filter (9 lbf ft) —(Filtech) Part# 15400-PLM-A01

www.ridgelineownersclub.com

And this is for the 2016 Pilot which would be the same.

 

[17RidgeLine]

Check here:

Maintenance Reference

All information here was gathered from the owners manual, parts websites, and members on the forums. Use at your own discretion. Oil 5.7 Quarts (0W20) Drain Plug Crush Washer (14mm) Part # 94109-14000 Drain Plug 14mm (29 lbf ft) Oil Filter (9 lbf ft) —(Filtech) Part# 15400-PLM-A01

www.ridgelineownersclub.com

And this is for the 2016 Pilot which would be the same.

Thank you so much. I had them written down and what I thought was safely stored. However I have seemed to misplaced them during renovation.

Sent from my SM-G973U using Tapatalk

 

[njamesj]

And this is for the 2016 Pilot which would be the same.

You are probably right, however, the Torque Specification document states the oil pan drain plug is 30 lb-ft while the Owners manual states 29 lb-ft. Casts a little doubt on the Torque Specification document.

 

[Jersey Jim]

You are probably right, however, the Torque Specification document states the oil pan drain plug is 30 lb-ft while the Owners manual states 29 lb-ft. Casts a little doubt on the Torque Specification document.

29 lb-ft sure sounds like a lot for a steel plug and an aluminum pan.

 

[Thunder Dump]

It is 29 lb-ft. The G1 torque spec was the same as well.

 

[MtMan]

Here are the Ridgeline Spec files: