WHERE DO YOU GET IT?

 

I saw it on eBay

 

OK thanks, a little pricey buy good idea
Honda Ridgeline 2017+ Trunk Storage Bin Set (Left and Right Side)

 

Interesting little item. Can you provide a link?

 

I did dummy

 

Dummy, really? True to form aren't you?

 

Hey, poohbill might be a little slow, but he's no dummy.
Yikes, $80! Too rich for me.
I could use these to hold my kayak tie downs. Are the 3D print designs available?

 

Yeah, even with the RIDGELINE logo on them, the $80 is a deal breaker....even at 1/2 that price I would balk...

 

good idea. could make these out of stiff cardboard for free!

 

I need that right now.

 

eBay FYI if you don't already know: when the item you're interested in is priced a bit too high for you, add it to your Watchlist. You may get a discounted offer from the seller in a day or two. I do that often. It still may be too expensive for me to pull the trigger, but many times the offer is in my comfort zone so I pull the trigger.

 

Jeeez...how about an old toolbag or getting one that are more often than not under 10 bux at Lowes or HD?

 

I got those but it doesn't fit on the sides like that.

 

I keep two ratchet straps in the bed, it would be nice to bundle them and drop them into a smallish container.

Yeggi has over 10 pages of Honda designs, but not this tray.

The ebay seller has them individually on Etsy for $40 each.

https://www.etsy.com/listing/4309801880/honda-ridgeline-trunk-storage-bin?gpla=1&gao=1&&utm_source=google&utm_medium=cpc&utm_campaign=shopping_us_ps-a-electronics_and_accessories&utm_custom1=_k_Cj0KCQjwrJTGBhCbARIsANFBfgvn_fYEUaRjMJzMFb5mUALBGLXJ9Q7vwzrs3QNrlnsKnFaVZ0DxbkAaAmUrEALw_wcB_k_&utm_content=go_21791667354_169566884118_716586690645_pla-315906365651_c__4309801880_12768591&utm_custom2=21791667354&gad_source=1&gad_campaignid=21791667354&gclid=Cj0KCQjwrJTGBhCbARIsANFBfgvn_fYEUaRjMJzMFb5mUALBGLXJ9Q7vwzrs3QNrlnsKnFaVZ0DxbkAaAmUrEALw_wcB

 

I keep two ratchet straps in the bed, it would be nice to bundle them and drop them into a smallish container.

Yeggi has over 10 pages of Honda designs, but not this tray.

The ebay seller has them individually on Etsy for $40 each.

https://www.etsy.com/listing/4309801880/honda-ridgeline-trunk-storage-bin?gpla=1&gao=1&&utm_source=google&utm_medium=cpc&utm_campaign=shopping_us_ps-a-electronics_and_accessories&utm_custom1=_k_Cj0KCQjwrJTGBhCbARIsANFBfgvn_fYEUaRjMJzMFb5mUALBGLXJ9Q7vwzrs3QNrlnsKnFaVZ0DxbkAaAmUrEALw_wcB_k_&utm_content=go_21791667354_169566884118_716586690645_pla-315906365651_c__4309801880_12768591&utm_custom2=21791667354&gad_source=1&gad_campaignid=21791667354&gclid=Cj0KCQjwrJTGBhCbARIsANFBfgvn_fYEUaRjMJzMFb5mUALBGLXJ9Q7vwzrs3QNrlnsKnFaVZ0DxbkAaAmUrEALw_wcB

My straps were stored for years in the side pocket above the lid until I moved them last year into a cute little box I keep in the trunk. Now, everytime I need straps, they are neatly stored in the box, in the trunk, under the load, unavailable. I’m a sucker for containers.

 

My ratchet straps stay rolled up in a walmart bag under the rear seat. But i only use them 8 or 9 times /year.

 

Right, I have two bags under the seat - towing items and another for ratchets/tied downs etc. I use these kayak buckle straps weekly

 

$80 is crazy for those. It doesn't look like it would be that hard to model it, mostly angular. If I find some spare time, I might give it a shot.

 

I'd go $40 for a pair if you get them made. I don't really need the "Ridgeline" script.

 

I just messaged the seller on eBay to see if he'll share the STLs for these bins and the little panel he's also selling for the bed side storage bin: Bed side storage model on eBay

I doubt he'll just give me the STLs for free but it never hurts to ask!

And if he doesn't share, the bed side storage piece looks pretty simple to model up so I can probably take a stab at that myself. Been meaning to learn how to do arrays in OnShape, and this would be the perfect opportunity for that. In fact I probably ought to try modeling it anyway so I can freely share it here. Then I'd only be giving away my own work, not someone else's.

 

Depending on the size of the print, they may or may not be within some people's capabilities-lots of consumer/hobby grade printers are 250mm square or so in print bed size-if these are larger you would need a larger format machine which is less common.

 

I did DYI version really cheap but functional. I recently put a custom fit board underneath, held in place with mounting puddy, and velcro to hold the cloth boxes. This shot also shows my trunk lid organizer and a wooden box where the jack normally sits (it’s in the plastic bin).